The optional accessories for
Kolorglobe MK2 4000
are:
•
GR0530
Fixing plate setup for truss mounting: easy fixing setup for suspended use in touring applications
•
GR0725
Flight case: safe and hard-duty cases for both the head and the ballast of the Globe series;
•
GR0721
10 m power supply and data extension cable to separate the main unit from the ballast set
•
GR0722
20 m power supply and data extension cable to separate the main unit from the ballast set
The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old
lighting fixtures must not be disposed of the normal unsorted municipal waste stream. Old appliances must be
collected separately in order to optimise the recovery and recycling of the materials they contain and reduce
the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you
dispose of the appliance it the must be separately collected.
Consumer should contact their local authority or retailer for information concerning the correct
disposal of their old appliance.
The unit display can point out faulty functionings by visualizing error codes. Such a visualization is possible only
when the display is at rest condition (visualization of the dmx address).
In this phase it is possible to use the display regularly by acting on the key “MENU” or scroll the errors by acting on
the keys “UP” and “DOWN”.
Display
Description
Function
Display PCB communication
error
Set the unit in vertical position, close the black out and switch
off the lamp.
PAN PCB communication
error
Set the unit in vertical position, close the black out and switch
off the lamp
TILT PCB communication error Set the unit in vertical position, close the black out and switch
off the lamp
PAN movement error
Set the unit in vertical position, close the black out and switch
off the lamp
TILT movement error
Set the unit in vertical position, close the black out and switch
off the lamp
Zoom sensor
Black Out
Set the unit in vertical position, close the black out and switch
off the lamp.
Security switch n°1
Set the unit in vertical position, close the black out and switch
off the lamp
Security switch n°1
Set the unit in vertical position, close the black out and switch
off the lamp
PAN movement error (4 posi-
tion recover in 5 minutes)
Set the unit in vertical position, close the black out and switch
off the lamp
TILT movement error (4 posi-
tion recover in 5 minutes)
Set the unit in vertical position, close the black out and switch
off the lamp
EEprom error
16.0 Message errors
15.0 Disposal
14.0 Accessories
48
English
