10.4.4 INFORMATION menu
Unit life counter submenu
The unit life counter needs to be reset to zero to provide accurate information on unit life.
• Push the “MENU” button on the control panel of the unit and select the information menu “INFO”.
• Select the “HRPR” option.
• Select the “PART” option to visualize the subtotal unit life counter.
• Keep simultaneously the keys “UP” and “DOWN” pushed for 5 seconds. The message “RST?” will appear. Push
the key “ENTER” to confirm the setting to zero or the key “SELECT” to cancel the operation.
The total counter can not be reset.
Software version submenu
The function in the information menu allows to get to know the number of software versions of each of the PCBs
with microprocessors fitted in the unit. By activating this function, a submenu will be accessed, where the PCBs
are listed and numbered according to the following table:
By pushing the key “ENTER” on the number corresponding to one of the PCBs listed, the corresponding software
version number will be visualized.
10.4.5 TEST menu
Display Description
Function
Fixture reset
Execute the reset of all the unit motors
PAN encoder
Display the PAN position recoveries in the last 5 minutes
TILT encoder
Display the TILT position recoveries in the last 5 minutes
Display Description
Function
6 motor PCB
Display the software version installed in the 6 motor PCB
PAN PCB
Display the software version installed in the PAN
TILT PCB
Display the software version installed in the TILT
Display Description
Function
Total conter
Total unit life counter (in hours)
Subtotal counter
Subtotal unit life counter from last reset (in hours)
Display Description
Function
Unit life
Total and subtotal unit life counter (in hours)
Lamp life
Lamp life counter (in hours)
Strobe time
Lamp strobe time counter (in minutes)
Software version
Display the software version installed
English
45
