Grindmaster GnB 10H Operator'S Manual Download Page 5

Page: 5 / 28

Grind’n Brew

Grindmaster

Operating the Touchpad (Refer to Figure C)

1. To select the appropriate bean hopper, press the

hopper (left) button until the desired indicator
arrow is illuminated.

NOTE: This step only applies to dual bean hoppers.

2. To select a portion size, press the center of the

Portion Size (middle) button until the half pot or
full pot symbol (depending on your need) is
illuminated.

3. The Mode (right) button allows you to select either

the “Brew Only”, “Grind Only”, or “Grind and
Brew” feature.
a) To grind only, press the center of the Mode
(right) button until the grinder symbol is
illuminated.
b) To brew only, press the center of the Mode
(right) button until the coffee cup symbol is
illuminated.
c)

To grind and brew, press the Mode (right)

button until both symbols are illuminated together.

Important:

Brewers are factory set for throw weight

and water portion. Please check that installation is
correct before making adjustment. No adjustments
should be necessary for normal installation.

Brewing
Important:

Brewers are factory set for the correct

grind and brew times for average situations. You should
not need to make adjustments in the field.

1. Make sure that a new paper filter is in the brew

basket and the brew basket is in place in the
brewer.

2. Place beans in the hopper.
3. Choose to “Grind and Brew”. Press the far right

touchpad so “Grind and Brew” lights are lit.

4. Choose the Portion Size. Press the middle touchpad

until desired volume is lit.

5. Choose Decaf or Regular coffee (only applicable to

dual bean Grind’n Brews). Press left touchpad.
Arrow will either point left or right for Decaf or
Regular.

6. Place a decanter or airpot under the brew basket,

depending on the model.

7. Press Start and the brewing cycle will begin.
8. You will see the coffee bean level go down slightly.

You will hear the coffee grind. Coffee is
automatically ground, portioned and placed in
brew basket. Then ground coffee is automatically
brewed. The Ready light will now blink, indicating
that grinding and brewing are in progress. This will
take 3-4 minutes for a 1/2 gal. (1.9 L) pot. Portions
are factory set. A stop function is added to the start
switch. When this switch is depressed, it allows the
unit to stop during the selected grind, brew, or
grind and brew functions.

After brewing a pot, the tank must reheat. Reheat time

is 5 1/2 - 8 minutes for 120V brewers. Remember that
the brewer function is disabled until the Ready light is
on, indicating that the water is hot enough to brew. A
flashing green light indicates that the brewer is
reheating or that there is a cycle in progress. Do not
remove the brew basket while the light is flashing.

The

brew basket must be removed before a new brew
can be initiated.

This feature ensures that the

operator discards the old coffee grounds and installs a
new coffee filter.

Operation

(Single Bean Model)

(Dual Bean Model)

Half or Full Pot

Bean Selector

(Dual Bean

Models Only)

Grind only