Timer Settings
A standard 64 oz. bottle Grind’n Brew
All Airpot Grind’n Brews
• Increase of 1 sec. to timer setting equates to an
increase in fluid volume by 1/2 oz (15ml).
• Decrease of 1 sec. to timer setting equates to a
decrease in fluid volume by 1/2 oz (15ml).
Component Counter Display
To enter counter displays press and hold the middle and
right buttons of the user interface.
To move to next setting press and release left button on
user interface.
To reset the counter, press and release the down button
on the programming interface.
Setting the Grind
(Refer to Figure D)
Tools Required: #2 Phillips screwdriver, 7/8" box wrench,
large flat blade screwdriver
1. Remove front decal panel by removing screw on
underside of panel and 2 screws on both sides of
panel.
2. Loosen adjusting screw lock nut by turning counter
clockwise.
3. Turn slotted adjusting screw clockwise to make the
grind coarser or counter clockwise to make the
grind finer. Generally, a 1/8 to 1/4 turn will provide
the desired adjustment.
4. After adjustment has been made, re-tighten the
adjusting screw lock nut.
5. Visually inspect the grind adjustment with a small
portion of coffee and readjust if necessary.
6. Reinstall the front decal panel.
Water System Errors
There are four system errors that can be detected by the
microprocessor. These errors are:
Er1
Water Fill Error – the water full detection has
failed, and the fill valve has been on for at least 5
minutes.
Er2
or
Er3
Thermistor Error – the Thermistor is
detected either open, shorted OR the water is
boiling.
Er4
Heater Error – the heater has been on for 3
minutes, but no rise in water temperature was
detected.
If any of these errors are detected, the unit will shut off
all water fill and heat related functions. Brewing is
disabled, but grinding is still allowed. The display will
show the error when the unit is idle. To clear any error,
the user can hold in the
UP
key for 5 seconds, reset
power to the unit, or enter field test mode.
10
Grindmaster
®
Grind’n Brew
Setting Approx. Setting Approx.
Single Bean yield Dual Bean yield
Single/Left Full Pot 4.2 sec. 2 oz. 5.7 sec. 2 oz.
Right Full Pot - - 5.7 sec. 2 oz.
Single/Left Half Pot 2.4 sec. 1.25 oz. 3.0 sec. 1.25 oz.
Right Full Pot - - 3.0 sec. 1.25 oz.
Full Pot 112-125 sec. 62 fl oz. 112-125 sec. 62 fl oz.
Half Pot 56-63 sec. 31 fl oz. 56-63 sec. 31 fl oz.
Setting Approx. Setting Approx.
Single Bean yield Dual Bean yield
Single/Left Full Pot 4.5 sec. 2.3 oz. 6.2 sec. 2.3 oz.
Right Full Pot - - 6.2 sec. 2.3 oz.
Single/Left Half Pot 2.7 sec. 1.4 oz. 3.7 sec. 1.4 oz.
Right Full Pot - - 3.7 sec. 1.4 oz.
Full Pot 140-153 sec. 72 fl oz. 140-153 sec. 72 fl oz.
Half Pot 70-77 sec. 36 fl oz. 70-77 sec. 36 fl oz.
Figure D
User Settings (continued)
Step
Setting
Display
1
Fill Valve Time
“FIL”
2
Display Time
Time displayed in minutes
3
Brew Valve Time
“Br”
4
Display Time
Time displayed in minutes
5
Shutter Solenoid Time
“SHt”
6
Display Time
Time displayed in minutes
7
Shutter Solenoid Cycles
“SHC”
8
Display Time
Time displayed in minutes
9
Left Auger Time
“A-L”
10
Display Time
Time displayed in minutes
11
Right Auger Time
“A-R”
12
Display Time
Time displayed in minutes
13
Heater Time
“Htr”
14
Display Time
Time displayed in minutes
15
Grinder Time
“Grn”
16
Display Time
Time displayed in minutes
Summary of Contents for GnB 10H
