Grind’n Brew
Grindmaster
®
15
Troubleshooting Guide (continued)
If you still need help, call Grindmaster-Cecilware Technical Service Department, (502) 425-4776 or (800) 695-4500
(USA & Canada only) (Monday through Friday 8 AM - 6 PM EST). Please have the model and serial number ready
so that accurate information can be given.
Prior authorization must be obtained from Grindmaster-Cecilware for all warranty claims.
Grindmaster-Cecilware provides the industry’s BEST warranty. Visit our website at gmcw.com for
warranty terms and conditions.
WARNING:
To reduce the risk of electrical shock, unplug the dispenser power cord before repairing or
replacing any internal components of the unit. Before any attempt to replace a component, be sure to check all
electrical connections for proper contact. Only a qualified service technician should perform electrical and
mechanical adjustments or repairs.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Hot water spigot not
• Drain tube limed-up.
• Delime tank and drain tube.
dispensing
• Defective valve seat.
• Replace seat.
Warmer Failure
• Loss of power.
• Check power source.
• Defective warmer switch or
• Perform continuity test. Replace
warmer heater.
defective component.
Auger motor, water
• Bus fuse on controller board is
• Replace 5 Amp bus fuse.
solenoid not working
blown.
Basket Out or Brew Cycle
• Polarity reversed.
• Connect red wire to red terminal
indicators will not light up
of LED.
• LED burned out.
• Replace LED.
Summary of Contents for GnB 10H
