Grindmaster GnB 10H, Operator'S Manual

Page: 7 / 28

Grind’n Brew Grindmaster ® 7
User Settings (continued)
User Menu Chart
Step Setting Display Adjustments
1 Temperature Scale between °F or °C
Displays the current
selection. Factory default
is “°F”
“°F” or “°C”
2
Water Temperature
setpoint in °F or °C
Displays the current
selection. Factory default is “195” in °F or “91”
in °C.
“170” to “205” °F
“77” to “96” °C
3
Show Auger Time
the amount of coffee beans fed into
the grinder
“At” None
4
Set Auger Time
the amount of coffee beans fed into
the grinder
Displays the current
selection depending on Brew Cycle
“0.1” to “45.0” seconds
5
Show Brew Time
Total amount of pour time for the brew
cycle
“br” None
6
Set Brew Time
Total amount of pour time for the brew
cycle
Displays the current
selection depending on Brew Cycle
“0.01” to “6.00” in
minutes.seconds
7 Show Pre-Infusion on “Pre-Infusion on” None
8 Set Pre-Infusion on time Displays the current selection of on time “Off” to “2.00” minutes
9 Show Pre-Infusion off “Pre-Infusion off”
10 Set Pre-Infusion off time Displays the current selection of off time “5 seconds” to “1 minute”
11 Show Pulse Brew “P-b” None
12
Pulse Brew Pulse Number
sets the number of pulses in the brew
cycle
Displays the current
selection depending on Brew Cycle
“OFF” to “10”
13
Pulse Brew Pour Time
sets the amount of pour time in each
pulse
Displays the current
selection depending on Brew Cycle
“0.05” to “1.00” in
minutes.seconds
14
Pulse Brew Delay Time
sets the amount of delay time
between each pulse
Displays the current
selection depending on Brew Cycle
“0.05” to “1.00” in
minutes.seconds
15 Show Low Temp No Brew “Ltn” None
16
Set Low Temp No Brew
enable or disable
Displays the current
selection. Factory default
is “ YEs ”
“OFF” or “ON”
(Dual Bean Model)
Half or Full Pot Bean Selector
(Dual Bean Models Only)
Grind only
Brew only
Grind and Brew Option
The settings selected on the touchpad
directly correspond to what is being
adjusted on the display.