Manual UC1 © Grimm Audio
26
6. Menus
The UC1 has many functions, preferences and system
setup items that can be controlled from the menu. To
enter the menu, press the top button with ‘menu’ next
to it on the display. You will see a screen with 7 tabs,
labeled F1 and F2 for Functions, P1, P2 and P3 for
Preferences and S1 and S2 for System setups. We walk
you through all these settings in the pages below. To
move to the next tab, press the top button ‘next tab’. To
exit the menu, press the bottom button ‘exit’. Note that
the exit button is disabled when an option is selected
and its arrow is blinking.
F1 menu
Whenever you enter the menu, the F1 page will be
available first. This page gives access to monitor
functions that are often used.
• Monitor source. You can select all inputs and outputs
here by pressing the main dial briefly (the arrow starts
blinking) and then turning the dial. When you reach the
last source, the order wraps and the first source
appears again. To confirm a choice, press the dial again
(the arrow stops blinking). This item does the same as
press-hold the main button and then turn. The result is
immediately visible in the left top corner of the display,
and the selected source becomes audible.
Grimm LS1 customers, please note that the UC1 cannot
select the analog and digital inputs of the LS1 as a
source. In case you need to use these, please use the
LS1 PC Remote software with the UC1. It is not possible
to combine the UC1 with the LS1r hardware controller
and LS1i USB interface. The UC1 replaces these.
F1 menu.
6.
M
en
us
