14
USEFUL RULES FOR EFFICIENT USE
1) Never strain the engine: when fumes are emitted from the exhaust it means that it is being strained.
Slow down.
2) Do not leave the machine out in the rain.
,IWKHPDFKLQHKHDWVXSRQWKHÀUVWGD\DWZRUNVWRSLWDQGDOORZLWWRFRROGRZQLWQHHGVWRUHVW
4) Frequently sharpen the mower blades: the cut will be better and the engine will not be strained as much.
5) Check the land before mowing to make sure that there are not any stones, sticks or foreign bodies.
.HHS WKH HQJLQH DW SHDN USP GXULQJ PRZLQJ DGMXVW WKH VSHHG DFFRUGLQJ WR WKH KHLJKW RI WKH
grass.
.HHSWKHJULOOHVDERYHWKHHQJLQHDQGWKHFRROLQJÀQVRIWKHK\GUDXOLFPRWRU)LJDQG)LJ
7) clean.
CUTTING POSITIONS
The cutting position is adjusted using the lever 8 Fig. 1/D.
The cutting deck can be set in 4 different cutting positions from 30 to 90 mm and one travel position in
which the blade disengages automatically Fig. 1/D.
In case of uneven ground, humps or dips, the cutting deck should be kept in the highest cutting position
to prevent knocks by the blade.
SLOPING GROUND
If possible, steep slopes must be mown in the up/down direction, taking great care when turning that the
wheels upstream do not strike obstacles (stones, branches, roots, etc.) which might cause the machine
to overturn, or lead to loss of control. If the drive wheels tend to slip, use the differential lock (Fig. 8).
Pressing engages this – it disengages automatically when the pedal is released.
Assess the conditions and take care if the ground and grass are damp since the machine might
slip.
Downhill, set off at low speed and do not pass over dry or cut grass since the wheels lose grip.
INTERVENTION OF SAFETY DEVICES
Remember that the engine will stop whenever:
– The operator gets up from the seat.
The engine will not start up if:
– The blade is engaged.
– Nobody is sitting in the driver’s seat.
– If the cutting deck isn’t at the highest setting (“travel”).
MAINTENANCE AND LUBRICATION
CAUTION
Remove the key and disconnect the plugs before performing any cleaning, maintenance or repair
operation. Always wear suitable clothing and working gloves.
IMPORTANT!
Protect the environment: carefully dispose of used oils, petrol and any other pollutant product!
(IÀFLHQWPDLQWHQDQFHDQGFRUUHFWOXEULFDWLRQKHOSNHHSWKHPDFKLQHLQSHUIHFWZRUNLQJRUGHU
ENGINE
For the frequency of lubrication, follow the rules given in the engine manual.
The oil must, in any case,
EHFKDQJHGDIWHUWKHÀUVWKRXUVRIRSHUDWLRQ
using AGIP SAE 30 engine oil. To remove the
RLOÀWDUXEEHUKRVHORQJHQRXJKWRGUDLQWKHRLOLQWRDFRQWDLQHURXWVLGHWKHPDFKLQHRQWRWKHWDS)LJ
%DQGWKHQXVHDVSDQQHUWRXQGRWKHWDS&KDQJHWKHRLOÀOWHU)LJ
FINAL DRIVE GEARBOX
Check the oil level every 130 hours by unscrewing the cap (A, Fig. 11); if necessary top up with 80 W 90
(API GL-5) gearbox oil. To drain the oil unscrew the cap (B, Fig.11). Change the oil every 1000 hours.
4XDQWLW\OWÀOOWKURXJKWKHYHQWFDS)LJ$
Summary of Contents for CLIMBER CL9.16
