GRIFOLS DG Spin Instructions For Use Manual Download Page 43 | Manualshive

Page: 43 / 50

GRIFOLS DG Spin Instructions For Use Manual Download Page 43

DG Spin

Warranty

11-1

11

WARRANTY

The warranty conditions are established in separate documents. For more
information, contact your distributor.
The warranty does not cover:

-

Damages caused by its initiation and functioning in environments that

contravene the Instructions for Use.

-

Damages caused by accident, negligence or breach of the Instructions
for Use.

-

Damages caused for reasons of force majeure (atmospheric, geological
phenomena, etc.).

-

Damages caused by incorrect handling including that carried out by
technical personnel not authorised by Diagnostic Grifols, S.A.

-

Parts of plastic or rubber as well as enamel and paints that have

deteriorated due to knocks or usage except in the case of a manufacture
defect.

-

The

DG Spin

Head, except in the case of a manufacture defect.

-

Breakdowns or defects due to transport.

The replacement of equipment or components will be subject to the criteria of
Diagnostic Grifols, S.A.

CAUTION!
Repairs should be exclusively carried out by
personnel authorised for this purpose by

Diagnostic Grifols, S.A.

«
...
41
42
43
44
45
...
»

Summary of Contents for DG Spin



















































Reviews:

No comments