manualshive.com logo in svg

GRIFOLS DG Spin, Instructions For Use Manual, Page: 18 / 50

Share
Download
GRIFOLS DG Spin Instructions For Use Manual Download Page 18

DG Spin

 

Description of the Centrifuge

 

 

4-3 

(1)

 

Centrifugation chamber 

(2)

 

Lean axle and Crosshead of 

DG Spin

 Head 

(3)

 

Motor protective cover 

The Centrifugation chamber also has a protective cover (Ref. (3), Figure 3) that 
protects the motor. 

4.1.2

 

DG Spin

 head 

The 

DG Spin

  head  is  a  circular  support  with  24  positions  numbered  with  Card 

holders (Ref. (2), Figure 4) to place the 

DG Gel

 cards for their centrifugation. 

 

1

2

3

11

22

33

 

Figure 4 : 

DG Spin Head 

 

(1)

 

Knob 

(2)

 

DG Gel 

card holders

 

 

(3)

 

Direction of centrifugation  

 
The 

DG Spin

 Head is removable and interchangeable with the aim of increasing 

the comfort of the OPERATOR when loading and unloading the cards. To remove 
it, lift it vertically by means of the Knob (Ref. (1), Figure 4) until it is released from 

its Lean axle (Ref. (2), Figure 4). 
To introduce the 

DG Spin

 Head again into the centrifuge, the Crosshead of the 

Lean axle has a magnetic system that facilitates correct positioning of the 

DG Spin

 

Head. 
 

Summary of Contents for DG Spin



















































Reviews:

No comments