Grifo Tele Web, User Manual

Page: 23 / 34

ITALIAN TECHNOLOGY
grifo
®
Page 17
Tele Web Controller Rel. 5.00
UTILIZATION
LOGIN
Before any other operation, server authentication is required (login).
Assiming 192.168.168.123 as the IP assigned to the Tele-Web, run the preferred browser (e.g.
Internet Explorer, Opera, Netscape, etc.) and type in the addres box:
http://192.168.168.123.
By default, no passowrd is set in the system as it is delivered.
Tele-Web responds with the page shown in figure 9, type the password (if present) in the specific
test obx or press immediatly the button if no password is set.
NOTE: For further information about how to set the password, please refer to paragraph “LOW
LEVEL CONFIGURATION”.
If the (optional) password it typed correctly, Tele-Web enables the commands page, from which it
is possible to control all the features of the application described in the paragraph “GENERAL
INFORMATION”.
If the password is not typed correctly, the Tele-Web enters in a idle mode for about one minute,
during which any command is ignored.
This way, illegal access attempts are heavily obstacolated.
F
IGURE
9: L
OGIN