Grifo Tele Web, User Manual

Page: 20 / 34

grifo ®
ITALIAN TECHNOLOGY
Page 14 Tele Web Controller Rel. 5.00
TO ENTER THE LOW LEVEL CONFIGURATION:
1. Connect the serial line of Tele-Web (connector plug CN3A of GPC
®
module) to a terminal
emulator or to a PC disconnecting the serial cable and connecting a plug serial cable (code of
grifo
®
listing CCR.plug9F)
2. On the PC, start a terminal emulator and configure it for 19200 Baud, 8 bit of data, 1 stop bit,
no parity
3. Switch off supply of Tele-Web
4. Enable low level configuration (see next table)
5. Supply Tele-Web
6. From the screen that appears on terminal emulator, select A
7. Type old password
8. Type new password
9. Exit from menu
10. Switch off supply of Tele-Web
11. Enable normal working mode (see next table)
12. Disconnect the plug cable to the PC, reconnect the cable already present before and supply the
Tele-Web
F
IGURE
6: L
OW LEVEL CONFIGURATION
GPC®
CARD
Enable configuration mode Enable normal working mode
GPC®
324D
J1 Open J1 Connected