Grifo Tele Web, User Manual

Page: 16 / 34

grifo ®
ITALIAN TECHNOLOGY
Page 10 Tele Web Controller Rel. 5.00
INSTALLATION
This chapter describes the hardware and software structure and all the steps to take for connecting
it to the netword, configure the PC and become operational.
MATERIAL REQUIRED
Tele-Web is made of three modules, all included in delivery:
- Micro Web Server; this modules is the interface to Ethernet network, in addition it runs the
TCP/IP stack and the HTTP server, it also stores HTML pages and images
- GPC
®
; this is the bridge between Micro Web Server and peripheral module, it runs the proper
telecontrol firmware (read the inputs, sets the outputs, etc.)
- ZBR/ZBT; this is the peripheral module featuring optocoupled inputs and relay or transistor
NPN (or PNP) outputs in a variable number, according to the model
This additional material not included in delivery is also required:
- Power supply cable
- 10BaseT type 5 Ethernet cable (straight or crosslink, ask the netword administrator)
- Serial line plug cable to connect the PC (
grifo
®
listing code CCR.plug9F)
POWER SUPPLY
To supply the structure, it is enough to connect CN2 of ZBx peripheral module to the power supply
source.
According to the ZBx model and its configuration, power supply source can be quite different.
Please refer to ZBx manuals for further information.