Grifo MP AVR-51, User Manual

Page: 65 / 78

ITALIAN TECHNOLOGY
grifo ®
Page 55
MP AVR-51 Rel. 3.10
FILE MENU
Name Shortcut Function
Load <F3> Analysis file format and loads the data from specified file to the
buffer. You can choose the format desired (Binary,
MOTOROLA, MOS Technology, ASCII space, Tektronix and
Intel (Extended) HEX). The control program stores a last valid
mask for file listing. You can save the mask into the config. file
by command Options / Save options.
Save <F2> Saves data in the buffer which has been created, modified, or
read from a device into a specified file. You can choose the
format desired (Binary, MOTOROLA, MOS Technology,
Tektronix and Intel (Extended) HEX).
Load e.table Load security table from disk.
Save e.table Save security table to disk.
BUFFER MENU
View/Edit <F4> This command is used to view (view mode) or edit (edit mode)
data in buffer (for viewing in DUMP mode only). Use arrow
keys to select the object to edit. Edited data are significed by
color.
Fill block Selecting this command fills the selected block of buffer with
requested hex (or ASCII) string. Set start and end block for
filling and requested hex or ASCII string.
Random buffer <Shift+Ctrl+F2> If this command is selected, the content of the buffer will be
filled with random data.
Copy block This command is used to copy specified block of data in
current buffer on new address. Target address needn’t to be out
from source block addresses. See also Move block.
Move block This command is used to move specified block of data in
current buffer to new address. Target address needn’t to be out
from source block addresses. Source address block (or part) will
be filled by topical blank character. See also Copy block.
Swap bytes in block This command swaps a high- and low- order of byte pairs in
current buffer block. This block must started on even address
and must have an even number of bytes. If this conditions do not
fulfil, the program modifies addresses itself (start address is
moved on lower even address and/or end address is moved on
higher odd address).