Grifo MP AVR-51, User Manual

Page: 62 / 78

grifo ®
ITALIAN TECHNOLOGY
Page 52 MP AVR-51 Rel. 3.10
Name Shortcut Function
Select/type <Ctrl+F5> This window allows to select the desired type of the device. At
the first - You must select a device class (e.g. EPROM) and
device subclass (e.g. 64Kx8 (27512)), if exists. Enter a
manufacturer name and a device signature. Partial information
will cause a list of manufacturers and devices to be disp-layed.
Selected device is automatically saved to buffer of default
devices (max. 10 devices). This buffer is accessible with
DEVICE/SELECT FROM DEFAULT DEVICES command. If
you wish display additional information about the current
device, use keyboard shortcut <Ctrl+F1> key. This command
provides a size of device, organization, programming algorithm
and a list of programmers (including auxiliary modules),
which support this device. You can find here also package
information and other general information about current device.
Select/mfr. <Shift+F5> This window allows you to select the desired device type by
manufacturer. First select a manufacturer name in window
MANUFACTURER and after the confirm by key <ENTER>
a wished device by its name and signature. Enter a device
singature. Partial information will cause a list of devices to be
displayed. Selected device is automatically saved to buffer of
default devices (max. 10 devices). This buffer is accessible with
DEVICE/SELECT FROM DEFAULT DEVICES command. If
you wish display additional information about the current device,
use keyboard shortcut <Ctrl+F1> key. This command provides
a size of device, organization, programming algorithm and a list
of programmers (including auxiliary modules), which support
this device. You can find here also package information and
other general information about current device.
Blank check <F6> This command allows to blank check of all device or its part if
possible. The control program reports a result of this action by
a sound signal and by a write of a warning message to INFO
window. The menu command Device\options allows to set
another working area as the standard.
Read <F7> This command allows to read all device or its part into the buffer.
The control program reports a finish of this action by a sound
signal and write a message to INFO window. The menu command
Device\Options allows to set another working area as the
standard. Setting an option Verify data after reading in this menu
command means a higher reliability for device reading.