4-26
CAN232 FD User Manual
4.3.1 show all
This will show all the CAN232 FD status information which includes factory settings, general configuration
and a CAN bus health status.
4.3.2 log
This will display the debug log generated during the previous device operation.
4.3.3 test
To confirm that all LED indicators are working, this diagnostic causes the CAN-TX/RX and COM-TX/RX
LED indicators to cycle continuously.
To terminate the diagnostic, press any key.
4.4 config level
Under the config level you can view and change settings for the operation and behavior of the device.
status>log
CAN: command mode
UART bad idfmt
CAN Error_warning
CAN Error_passive
status>
status>show all
Device Name : CAN232
Serial Number : 000002
FW Version : 01.00
COM 115200 baud, 8, none, 1, none, command
CAN 250000 bps
CAN Status : Active
Bus Off events : 0
Passive events : 0
Warning events : 0
Overrun events : 0
CAN Rx Packets : 0
CAN Rx Overflow: 0
CAN Rx Skipped : 0
CAN Tx Packets : 0
CAN Tx Timeouts: 0
status>
Summary of Contents for CAN232 FD
Page 1: ...CAN232 FD User Manual Revision B January 13 2020 ...
Page 2: ......