Grid Tie PV-10000T-U, Installation & Operation Manual

Page: 44 / 84

43
7.4.4 Daily Error Frame
This frame exists when there have been operation errors during the day.
7.4.5 Operation Frame
This frame shows operational information of inverter. There are five sub-frames
as described here.
1. E-Total & H-Total: E-Total (total accumulated energy) in kWh and H-
Total (total operating time of inverter) in hours
2. LAN and Wi-Fi IP addresses: IP address information of inverter
3. Clock: To set clock, refer to Ch.7.2 Setting Clock on P.38
4. Language: Language displayed on LCD screen
5. Parameters: Grid safety regulation (VDE0126-1-1/A1, VDE-AR-N 4105, or
EN50438), 70% power limit (ON/OFF), and power factor PF (-0.8 ~ +0.8)
6. System Info: F/W version currently installed on inverter
7. Idc & Pdc: The total instantaneous input DC current (unit: A) and total
instantaneous input DC power (unit: kW) from your solar panel(s).
8. Power Limit: The restraint in terms of percentage of rated AC output
power of inverter currently posted by Ripple Control Receiver (RCR).
Error Count
Error Type