Grid Tie PV-10000T-U, Installation & Operation Manual

Page: 35 / 84

34
6.10 Ready to Start
6.10.1 Checklist
Before starting the inverter, please check the following items:
Item Check Points Checked?
Mounting

Inverter is firmly mounted on
bracket(s)

The 2 lock caps are secured

Locks are closed
AC

All cables are firmly fixed on
terminal block

Polarities are matched

Protective Ground is available

Cable gland is tightened firmly
RS485
RJ45
Ripple Control
Receiver

All terminals are secured

Polarities are matched

Wires are tightened by cable
gland

If not used, sealing plugs are in
position
Item Check Points Checked?
Front Cover

Front cover is firmly attached

All screws are secured
DC

All plugs are firmly connected

Polarities are matched

Strings are not mixed wired (for
multiple MPPT models)
Be Sure to SWITCH OFF PV
Direct pull-off of DC plugs can lead to sparks. Be sure to
switch off PV beforehand.