manualshive.com logo in svg

Greystone DataFast D-101, User Manual, Page: 7 / 36

Share
Download
Greystone DataFast D-101 User Manual Download Page 7

D-101 DataFast User’s Manual

1-3

Introduction

1-3 Specifications

•

Power Requirements:

 110/220 Vac 1A 47-63Hz

•

Dimensions:

 6.5"(W) x 8.0" (D) x 1.85" – 2.75" (H)

•

Weight:

 1.5 lb

Serial Port

The serial port is reserved for factory test and technical support of the
D-101. A D-101 unit can connect to an ASCII terminal or to a host PC
by a serial port to serial port cable. The D-101 serial port is configured as:

• DOS COM1

• 9600 baud, 8-bit data, 1-stop bit, no parity

• IBM PC/AT-compatible DB-9 connector

Parallel Port

The parallel port is used to connect the D-101 to a host PC through a
standard IEEE-1284 parallel interface. A PC bootable floppy containing
remote software utilities is provided to enable copying between the
D-101 and a PC, and for D-101 software upgrades. The D-101 parallel
port is configured as:

• IEEE-1284 compatible

• DOS LPT1

• EPP mode (if supported by the connected PC.

Otherwise, bi-directional mode is used.)

Summary of Contents for DataFast D-101





































Reviews:

No comments