4-2
D-101 DataFast User’s Manual
Remote Operation
3. Connect power to the D-101. The D-101 will display the main
menu:
D-101 Display:
The D-101 is now ready for remote operation. Continue to the next
section to run the remote software utility on your PC.
4.2 Using the Remote Software Utility
The floppy diskette provided with the D-101 is a bootable diskette. To
run the utility from this disk, place it in the A: drive. If Windows is
currently running, select “Shutdown” and then “Restart” from the Start
menu. If the PC is powered down, turn it ON and the system will boot
automatically from the floppy diskette and display the following screen
on the PC while attempting to establish communication with
the D-101.
PC Screen:
A:\>remote
Establish a connection with the D-101
Waiting for D-101
Press ESCAPE to exit._
M A I
N
M E N U
S T A N D A R D
J O B S
S R C E = I
N T
T A R G E T = E X T
S E L = S E L E C T
Summary of Contents for DataFast D-101
Page 4: ......
Page 8: ...1 4 D 101 DataFast User s Manual Introduction ...
Page 34: ...4 8 D 101 DataFast User s Manual Remote Operation ...
Page 35: ......
