background image

 

PRINTED IN C

ANAD

A       

Page  7

SPECIFICATIONS

Gas Type Detected .................................................Carbon dioxide (CO

2

)

Sensor Type ..............................................................Dual channel non-dispersive infrared (NDIR)

Sensor Accuracy ......................................................±(30 ppm + 3% of measured value)

Measurement Range .............................................0-2000 ppm (default), adjustable 1000-10,000 ppm

Pressure Dependency ...........................................< ±2.5ppm/°C

Response Time ........................................................20 seconds (T63)

Warm-Up Time .........................................................1 minute

Sensor Life Span......................................................>15 years

Transmitter Accuracy ............................................±0.25% of span

 

(including linearity, hysteresis and repeatability)

Power Supply ...........................................................24 Vdc ±20% or 24 Vac ±10%

 

(non-isolated half-wave rectified)

Protection Circuitry ................................................Reverse voltage and transient protected

Input Voltage Effect ...............................................Negligible over specified operating range

Output Signal Type ................................................4-20 mA (3-wire), 0-5 or 0-10 Vdc (field selectable)

Current Consumption ...........................................

Current:

 75 mA @ 24 Vdc max, 150 mA @ 24 Vac max

 

Voltage:

 50 mA @ 24 Vdc max, 100 mA @ 24 Vac max

Output Drive @ 24 Vdc .........................................

Current:

 550Ω max

 

Voltage:

 10,000Ω min

Ambient Operating Range ..................................0 to 50°C (32 to 122°F), 0 to 95 %RH non-condensing

Storage Conditions ................................................-40 to 70°C (-40 to 158°F), 0 to 95 %RH non-condensing

LCD Display Units ...................................................ppm (CO

2

), °C/°F for optional temperature/setpoint

Display Range ..........................................................0-10,000 ppm, 0 to 50°C / 0 to 122°F

Display Size ...............................................................35mm W x 15mm H (1.4" x 0.6")

Digit Height ..............................................................2-line x 8 character

OPTIONAL TEMPERATURE SENSOR

Type .............................................................................Thermistor or RTD

Accuracy ....................................................................

Thermistors:

 ±0.2°C (±0.36°F) @ 25°C (77°F)

 

Platinum RTD's:

 ±0.3°C (±0.54°F) @ 0°C (32°F)

 

Nickel RTD's:

 ±0.4°C (±0.72°F) @ 0°C (32°F)

Output ........................................................................2-wire resistive

Relay (Optional 2-wire output) ..........................Form A (N.O.), 2 Amps @ 140 Vac / 30 Vdc

Enclosure ...................................................................Polycarbonate UL94-V0 (NEMA 4X)

 

116mm W x 100mm H x 54mm D (4.6" x 3.9" x 2.1")

Wiring .........................................................................Screw terminal block (14 - 22 AWG)

Approvals ..................................................................CE

Country of Origin .......................................................Canada

DIMENSIONS

112.5 mm

4.43"

53.7 mm

2.11"

152 mm

6"

22.5 mm

0.88"

116.5 mm

4.58"

99.7 mm

3.93"

0.5" NPT

Copyright © Greystone Energy Systems, Inc.   All Rights Reserved    Phone:  +1 506 853 3057  Web: www.greystoneenergy.com

IN-GE-CD2DTXXX-03

Summary of Contents for CD2DT Series








Reviews: