OUTPUT SIMULATION MODE
The Output Simulation function controls the digital display 4-20mA output and control relay. Use it to
simplify calibration of remote 4-20mA devices such as chart recorders or remote displays, and to test
relay set-points.
Press
Ç
and
È
to simulate levels from 0% to 100% of your calibrated span. Increments will
automatically accelerate when
Ç
or
È
is continuously pressed.
TO STORE (SAVE) CALIBRATION
Press
Ç
to Store calibration (LIT will display
-
C.S
-
).
Calibration is stored in non-volatile memory (even through power interruptions).
Press
È
to return to NORMAL mode
without
storing any changes.
Page 12
LIT25 Level Indicating Transmitter
Manual Series 3.5.1
È
È
721.4
721.3
Ç
Ç
Ç
0.1
0.2
The Display will alternate between
and
È
È
Ç
RETURN TO
NORMAL MODE
CALIBRATION
STORED
