GRESTER GRG-HT-9800-IE, User Manual

Page: 16 / 38

30 31
ENGLISH
4. COMPONENTS LIST
No. Description Quantity
1 Computer 1
2 Upper computer cable 1
3 Bolt 4
4L Computer plastic cover L 1
4R Computer plastic cover R 1
5 Bolt 8
6 Bolt 2
7 Saddle 1
8 Tube spacer 1
9 T-shaped round head grooved pin 1
10R Seat post plastic cover L 1
10L Seat post plastic cover R 1
11 Bolt 2
12 Seat post set 1
13 Tube bundle 1
14 Round head grooved pin 1
15 Tension cable 1
16 Lower computer cable 1
17 Sensor set 1
18 Sensor 1
19 Flywheel frame 1
20 Ball bearings 30
21 Washer 1
22 Waved washer 1
23 Safety ring 1
24 Round head grooved pin 1
25 Slide tube 1
26 Nut 2
27 Tube end cap 1
28L
Housing
L
1
28R
Housing
R
1
29 Bolt 6
30L Pedal crank L 1
30R Pedal crank R 1
31 Anti-loose hex head bolt 2
32 Crank end cap 2
33L Pedal L 1
33R Pedal R 1
34 Bolt 8
35 Joint lever 3
36 Hex screw 2
37 Spring washer 2
38 Washer 2
39 Axle for flywheel holder 1
40 Nut 2
41 Hex screw 1
42 Tapered spring 1
No. Description Quantity
43 Magnet set 1
44 Washer 1
45 Washer 1
46 Rear end cap 2
47 Rear Stabilizer 1
48 Flat washer 10
49 Allen head screw 4
50 Power cable 1
51 Spring washer 10
52 Washer 1
53 Belt wheel 1
54 Belt 1
55 Pedal Axle 1
56 Allen head screw 3
57 Upper protective cover 1
58L Front end cap L 1
58R Front end cap R 4
59 Front Stabilizer 1
60 Motor 1
61 Allen head screw 7
62 Waved washer 2
63 Handlebar post 1
64 Pulse contact surfaces 2
65 Bolt 2
66 Foam handle 2
67 Hand pulse cable 2
68 End cap 2
69 Handlebar 1
70 Nut 2
71 Idler 1
72 Waved washer 1
73 Idler rack 1
74 Spring 1
75 Spring 2
76 Ball bearings 1
77 Washer 1
78 Flywheel 1
79 One-way ball bearing 1
80 Ball bearings 1
81 Axle for flywheel 1
82 Small belt wheel 1
83 Bearing 1
84 Nut 2
85 Allen key wrench 1
86 Combination wrench 1
87 Adaptor 1
88 Nut 1
5. ASSEMBLY INSTRUCTIONS
Take all parts out of the packaging carefully and place them on a flat surface. When doing this,
use suitable padding to protect the working surface. Assembly of the individual parts should
be carried out by 2 people!
Before assembly, check the parts list to verify that all parts are present. Some parts have already
been pre-assembled to simplify the assembly process for you.
STEP 1
59
48
49
51
48
47
51
49
1. Attach the front stabilizer (59) to the main body. Secure with 2 sets of flat washers (48),
spring washers (51) and Allen head screws (49). Tighten securely.
2. Attach the rear stabilizer (47) to the main body. Secure with 2 sets of flat washers (48),
spring washers (51) and Allen head screws (49).
Note: You may adjust the rear end cap accordingly to compensate for uneven surfaces.
GRG-HT-9800-iE-IM-DE+GB+FR-04.indb 30-31 20/6/2016 5:39 PM