T02.0.3X.6C-07
Mounting and operating manual OXY 3610 MP
Page 7 von 14
4
Assignment of elbow-type plug
Description of the contacts.
2-wire connection (4-20mA)
1= supply vUv
2= GND / signal
3- wire connection (voltage)
1 =
3 = supply vUv
(4) = supply voltage -Uv
signal -
4- wire connection (voltage)
1=
2= signal -
3= supply vUv
(4)= supply voltage -Uv
5
Display functions
During normal operation the
oxygen content
is displayed in the unit
[mg/l]
. By pressing the Key 2 (down) the temper-
ature at the electrode can be shown, pressing key 3 (up) shows the
state of the electrode
in
[%]
. The state is calcu-
lated and stored during the calibration (see below). The displays of the state and the temperature of the electrode are
marked by small arrows at the upper end of the display. After 5 seconds the transducer display switches automatically
back to the oxygen value.
display dissolved oxygen
display electrode temperature
display state of electrode
1
2
A
Uv
V
3
Uv
1
V
Uv
3
1
2
