T02.0.3X.6C-07
Mounting and operating manual OXY 3610 MP
Page 5 von 14
1.6.2
During normal operation
Do not use this product as safety- or emergency- stop devices or in any other application where
failure of the product could result in personal injury or material damage.
Failure
to comply with these instructions could result in death or serious injury and mate-
rial damage.
Whenever there may be a risk whatsoever involved in running it, the device has to be
switched off immediately and to be marked accordingly to avoid re-starting. Operator safety
may be a risk if:
-there is visible damage to the device
-the device is not working as specified
-the device has been stored under unsuitable conditions for a longer time
In case of doubt, please return device to manufacturer for repair or maintenance.
With costs
.
The conceptual design, particularly when connecting with other devices has to be done thor-
oughly.
Internal connections of other devices e.g. from ground with protective earth may lead to prohib-
ited voltage levels that could disturb the function, damage or even destruct the device or any
connected equipment. Never run the device with a damaged or faulty power supply.
2
Product description
2.1 Scope of supply
1
x
Dissolved Oxygen-Measuring transducer
2
x
GWO 3600-L04_MU
3
x
KOH 100
3
x
Mounting and operating manual OXY 3610 MP
Dissolved Oxygen-Measuring transducer
GWO 3600-L04_MU
2.2
Fehler! Verweisquelle konnte nicht gefunden werden.
Production date code
Article number
CE-mark see below:
Options
Disposal (s. Chapter
12.2)
Measuring range
Output signal
Please refer to
manual.
Power supply
Power supply
Manufacturer address
CE mark:
With the CE-Sign declares the manufacturer, that the Product is conform with the pre-
vailing requirements of EU.
