background image

H31.0.11.6C-11

User’s Manual GMH3110

page 7

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         

_______________________________________________________________________________________________________________________

  

8 Specification

Measuring ranges:

Display range:

max. -1999...9999 digit, depending on connected sensor

Resolution:

depending on connected sensor

Pressure units:

mbar, bar, kPa, MPa, mmHg, PSI mH

2

O (only for devices with ‚m‘ printed below

display), selectable depending on connected sensor

Accuracy: (typ.)

±0,1%FS  

(at nominal temperature)

(FASt and P.dET:  ±0.5%FS)

Measuring rate:

4 meas./sec

Nominal temperature:

25°C

Sensor:

All sensors of the GMSD..-series without recalibration can be connected

Connection: 

Mini-DIN-Socket with locking mechanism
The sensor will automatically be detected, the measurement range settings are set
referring to sensor data

Power-Off-Function:

  Device will be automatically switched off if no key is pressed/no interface

communication takes place for the time of the power-off delay. The power-off delay
can be set to values between 1 and 120 min.; it can be completely deactivated.

Display

:

2 four digit LCDs (12.4mm high and 7 mm high) for measuring values, and for min/
max memories, hold function, etc. as well as additional functional arrows.

Pushbuttons

6 membrane keys

Interface

:

Serial interface (3.5mm jack) can be connected to RS232 interface of a PC via
electrically isolated interface adapter GRS3100, GRS3105 or USB3100 (see
accessories).

Power supply

9V battery, type: IEC 6F22  (included in scope of supply)
as well as additional d.c. connector (diameter of internal pin 1.9 mm) for external
10.5-12V direct voltage supply.               (suitable power supply: GNG10/3000)

Power consumption: 

Slow measuring rate: < 1.5 mA

Low battery warning:

!

-display and ' bAt '

Housing

impact-resistant ABS, membrane keyboard, transparent panel, Front side IP65

Dimensions: 

142 x 71 x 26 mm (L x W x D)

Working temperature:

-25...+50°C

Allowable rel. humidity: 0...95 % RH (not condensing)
Storage temperature:

-25...+70°C

EMC

:

The device corresponds to the essential protection ratings established in the
Regulations of the Council for the Approximation of Legislation for the member
countries regarding electromagnetic compatibility (2004/108/EG).

Additional fault: 

<1%

_

+

Summary of Contents for GMH3110









Reviews: