GREINER 0815502, Mounting And Operating Manual

Page: 5 / 16

2 Mounting
© 2018 GREINER GmbH - Mounting and operating manual 5 / 16
08
1_
ins
truct
ion
-ma
nu
al
_EN
08
15
50
2_
re
v_
0.d
oc
x
2 Mounting
1. Raise up the backrest (see 4.2 Backrest inclination adjustment) (without Fig.).
2. Insert headrest correctly (see 4.3 Headrest adjustment) (without Fig.).
2.1 Mounting the guide rails (option)
The mounting of the optional guide rail set of the company GREINER GmbH is described here.
1. Move the two guide rails to the mounting position as shown.
If necessary, after loosening the locking mechanism (screwdriver), move the guide rails until the
two rear mounting points (A) are accessible.
A. Rear mounting points
Fig. 1 Mounting the guide rails (option) - move the guide rails into mounting position
2. Move the seat to the mounting position (seat in reclining position - seat and backrest upholstery
downwards - use a clean underlay, if necessary).
3. Align the two guide rails (B) as shown (do not mix up right and left or top and bottom).
4. First screw in the two rear fastening screws (C) together with the toothed washers (D) (only apply
the screw head - do not tighten).
B. Guide rail
C. Fastening screw
D. Toothed washer
Fig. 2 Mounting the guide rails (option) - screw in rear fastening screws (do not tighten)
5. After loosening the locking mechanism (screwdriver), the guide rails must be moved until the front
mounting points (E) are accessible.
6. Now screw in the corresponding front fastening screw (F) together with the toothed washer (G)
and tighten to 25 Nm.
E. Front mounting points
F. Fastening screw
G. Toothed washer
Fig. 3 Mounting the guide rails (option) - screw in and tighten the front fastening screws
A
C
D
B
E
G
F