GREINER 0815502, Mounting And Operating Manual

Page: 7 / 16

2 Mounting
© 2018 GREINER GmbH - Mounting and operating manual 7 / 16
08
1_
ins
truct
ion
-ma
nu
al
_EN
08
15
50
2_
re
v_
0.d
oc
x
2.2 Mounting the armrests (option)
The mounting of the optional armrests from GREINER GmbH is described here.
1. Remove the top provisional fastening screw (I) of the backrest fitting.
(galv. version - not polyamide coated).
NOTE Do not remove both fastening screws of the backrest fitting at the same time.
This makes it unnecessarily difficult to install the armrest.
I. Provisional fastening screw (top)
J. Final fastening screws
(plastic bag)
Fig. 7 Mounting the armrests (option) - remove provisional fastening screw (top)
2. Screw the supplied final fastening screw (J) into the top of the backrest fitting
(only apply screw head - do not tighten).
WARNING
The fixing of the backrest fitting is relevant to safety and must therefore be strictly ob-
served.
The provisional fastening screws must not be used for the final mounting of the armrests.
3. When replacing the bottom provisional fastening screw (K) of the backrest fitting, follow the same
procedure as for the top one (without Fig.).
4. Now tighten the two final fastening screws to 48 Nm.
If necessary, dispose of both provisional fastening screws (I + K).
I. Provisional fastening screw (top)
J. Final fastening screw
K. Provisional fastening screw (bottom)
Fig. 8 Mounting the armrests (option) - screw in and tighten the final fastening screws
5. Carry out a final function check of the armrest(s) (see 4.10 Armrest adjustment (option)).
J
I
K
J
I
K