WARNING
The garden shredder will not operate if the locking knob is
loose.
9
STOP THE MACHINE
1. Push the I/O switch to “O” to turn the garden shredder
off.
10
INSTRUCTION
Overload protection
•
Your garden shredder is designed with overload
protection. If the shredder is clogged during shredding,
the overload protection will cut the power automatically
to protect your shredder. Disconnected from power source
and wait at least 5 minutes for the unit to cool before
restarting by first pressing the reset button and then the
I/O switch.
Locking Knob
•
The garden shredder is equipped with a safety interlock
switch on the closure between the cover and main body.
The switch is activated when the cover is securely closed
and tightened by the locking knob. When the cover is
open or not secured well, the shredder will not run.
Always tighten the locking knob by turning it clockwise
before operation.
Blades
•
The blades on the rotary plate are reversible. For quality
and safety reasons, we recommend that only identical
replacement blades be used should it become necessary to
replace them.
11
MAINTENANCE
WARNING
Remove the battery pack from the machine before
maintenance.
WARNING
Do not use strong solvents or detergents on the plastic
housing or components.
12
MAINTENANCE OF THE
MACHINE
WARNING
Always turn off the garden shredder and unplug the power
cord from the outlet before maintaining the shredder.
WARNING
Always wear gloves when cleaning.
1. Cleaning garden shredder:
2. Unscrew the locking knob counter clockwise and open
the cover.
3. Clean cutting blades and discharge area and remove wood
sticks or objects that may clog the blades.
4. The garden shredder has two blades that are attached to a
rotary plate with two screws. Before any maintenance or
cleaning is done on the blades, always turn the switch off
and disconnect the plug from the outlet.
5. Check blades for damage. Use only identical replacement
parts if it becomes necessary to replace them.
6. Return the cover to its upright position and tighten the
knob before operating the garden shredder.
7. Use only a warm damp cloth and a soft brush to clean
your garden shredder. Always wear safety glasses to
protect your eyes during cleaning.
8. Never spray water on the garden shredder or wash it with
water. Do not use detergents or solvents as these could
cause irreparable damage to your shredder.
9. The fastening screws of the stand assembly should be
checked from time to time. Periodically check all nuts,
bolts and screws to be sure the shredder is in safe
working condition.
10. Make sure the ventilation slots are always kept clean and
are free of debris.
11. To protect the garden shredder from corrosion when
storing for a long period, treat the cutting blade with oil.
13
CUTTING BLADE
REPLACEMENT
4
3
1. The reversible blade is fastened to the rotary plate with
two screws. Before any maintenance or cleaning of the
blades, always turn the switch off and disconnect the plug
from the outlet.
2. Turn the Locking Knob counterclockwise until the
housing cover can be opened.
3. Lift up the housing cover to expose the two blades.
4. Align the slots on the board, the blade support and the
main body and insert a metal rod like a screwdriver into
the slots to prevent rotating when removing the blade
with the supplied socket wrench.
5. Remove the old blade. Either reverse the blade so the
sharp edge is in the cutting position or insert a
replacement blade. Use the same method to replace the
other blade.
7
English
EN
Summary of Contents for GACSB
Page 1: ...GACSB RU SHREDDER...
