6.3
INSTALLING HOPPER
1. Snap the hopper ring onto hopper securely.
2. Fit the hopper (23) onto the upper feeding chute (5).
3. Attach the buckle (24) to the retainer in the upper chute.
4. Fasten the buckles (24) on both sides and make sure the
hopper is placed correctly and securely
6.4
INSTALLING COLLECTION BOX
1. Install collection box by pushing it into the frame beneath
shredder body
7
OPERATION INSTRUCTIONS
WARNING
Before starting, ensure that the feed inlet is empty.
WARNING
Always wear ear and eye protection and wear gloves during
operation.
CAUTION
Longer material standing out from the shredder could lash
out when being pulled in by the blades. Keep a safe
distance.
CAUTION
When using the garden shredder and feeding branches into
the shredder, sometimes the blades pull the material into the
opening. Keep hands at a safe distance.
CAUTION
The ventilation slots must not be covered.
•
Only insert as much material as to prevent blockage of
the feeding funnel. Chop garden waste that has been
stored for a few days and is wilted and damp alternately
with dry branches. This prevents the cutting blades from
blocking up. Widely branched material with leaves must
be completely chopped before new material is fed. Make
sure that the chopped material can fall freely from the
ejection slot.
•
Keep hold of branches while feeding them into the garden
shredder until they are automatically drawn in.
•
Keep to the working speed of the garden shredder and do
not overload it.
•
To protect the garden shredder from clogging, shred
wilted garden waste that has been left for a few days and
shred thin twigs alternately with branches.
•
Before you shred roots, remove any remaining soil and
stones from them.
•
Do not shred soft, damp material such as kitchen waste,
take it straight to the compost.
•
Keep a few dry branches for the end, as they will help
clean the garden shredder.
•
Only switch the garden shredder off after all of the
shredding material has passed through the discharge
chutes. Otherwise, the discharge chutes may jam the next
time the shredder is turned on.
8
START THE MACHINE
1. Make sure the switch is in the off position.
2. Plug the garden shredder into a suitable outlet using an
approved extension cord if necessary.
3. Push the I/O switch to “I” to turn the garden shredder on.
6
English
EN
Summary of Contents for GACSB
Page 1: ...GACSB RU SHREDDER...
