6. Replace and tighten the two screws to secure the new
blade to the support.
14
TROUBLESHOOTING
Problem
Possible cause
Solution
The motor does
not run
Power failure /
unit not plugged
into a working re-
ceptacle.
Check to make
sure unit is plug-
ged into a working
outlet. Make sure
extension cord is
not damaged.
The overload pro-
tection has respon-
ded.
Remove any chips
and press the reset
button. Wait five
minutes before
pressing the
ON/OFF switch to
restart the unit.
The hopper is
open.
Check to make
sure the hopper is
secured and the
lock knob is tight-
ened.
The material to be
chopped is not
pulled in.
The material is
jammed in the
feed inlet.
Disconnect the
power supply and
open the hopper.
Pull the material
from the feed in-
let. Replace the
hopper.
The cutting blade
is blocked.
Disconnect the
power supply and
open the hopper.
Open the blade
cover. Remove the
blocked material
and replace the
blade cover and
hopper.
The discharge
chute is blocked.
Disconnect the
power supply and
open the hopper.
Open the plate of
the discharge
chute to clear the
blocked material.
Replace the plate
and hopper.
Problem
Possible cause
Solution
Blades becomes
worn.
Reverse the blades
by first discon-
necting the unit
from the power
supply. The rever-
sible blade is fixed
to the rotary plate
with two screws.
Align the slots on
the board and the
blade support, in-
sert a metal rod
like a screw driver
into the slots to
prevent rotating
when reversing the
blades and use the
supplied socket
wrench to unscrew
the screws.
15
TECHNICAL DATA
Мощность
2500 W
К-во оборотов без нагрузки
4500 SPM
Max
диаметр реза
45 mm
Уровень защиты
IPX4
Вес
13.2 kg
Объем корзины
40 L
Измеренный уровень
звуковой нагрузки
84 dB(A), K
PA
=3 dB(A)
Guaranteed sound power lev-
el
106 dB(A)
8
English
EN
Summary of Contents for GACSB
Page 1: ...GACSB RU SHREDDER...
