4
IMPORTANT SAFETY INSTRUCTIONS
•
Remove any adjusting key or wrench before turning the power tool on.
A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
•
Do not overreach. Keep proper footing and balance at all times.
This enables better
control of the power tool in unexpected situations.
•
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
•
If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used.
Use of dust collection can reduce dust-
related hazards.
4. POWER TOOL USE AND CARE
•
Do not force the power tool. Use the correct power tool for your application.
The correct
power tool will do the job better and safer at the rate for which it was designed.
•
Do not use the power tool if the switch does not turn it on and off.
Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
•
Disconnect the plug from the power source and/or the pack from the power tool be-
fore making any adjustments, changing accessories, or storing power tools.
Such pre-
ventive safety measures reduce the risk of starting the power tool accidentally.
•
Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
•
Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
•
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
•
Use the power tool, accessories and tool bits etc. in accordance with these instruc-
tions, taking into account the working conditions and the work to be performed.
Use
of the power tool for operations different from those intended could result in a hazardous
situation.
5. BATTERY TOOL USE AND CARE
•
Recharge only with the charger specified by the manufacturer.
A charger that is suitable
for one type of pack may create a risk of fire when used with another pack.
•
Use power tools only with specifically designated packs.
Use of any other packs may
create a risk of injury and fire.
•
When pack is not in use, keep it away from other metal objects, lik paper clips, coins,
keys, nails, screws or other small metal objects, that can make a connection from one
terminal to another.
Shorting the terminals together may cause burns or a fire.
•
Under abusive conditions, liquid may be ejected from the ; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical
help.
Liquid ejected from the may cause irritation or burns.
•
Use only with Greenworks Elite batteries: L-300, L-600
•
Use only with Greenworks Elite Chargers: C-220, C-400
