8
SYMBOLS
.
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
safer.
SYMBOLS
DESIGNATION
EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watts
Power
hrs
Hours
Time
no
No Load Speed
Rotational speed, at no load
/ min
Per Minute
Revolutions, strokes, surface speed, orbits etc., per
minute.
Direct Current
Type or a characteristic of current
Lithium-ion Battery
Recycling
Designates that this tool is in compliance with
lithium-ion battery recycling program requirements.
Safety Alert Symbol
Precautions that involve your safety.
Read the Instruction
Manual
To reduce the risk of injury, user must read and
understand the Instruction manual before using this
product.
Eye Protection
Wear eye protection when operating this equipment.
Wear Ear Protection
Wear ear protection when operating this equipment.
Gloves
Wear non-slip, heavy-duty protective gloves when
handling the chainsaw and the blade.
Kickback
DANGER! Beware of kickback.
Operate With Two Hands Hold and operate the saw properly with both hands.
One Handed
Do not operate the saw using only one hand.
Bar Nose Contact
Avoid bar nose contact.
Wet Conditions Alert
Do not expose to rain or use in damp locations.
