GreenWave Reality PowerNode NP220-B, Manual

Page: 9 / 26

7
Indicators
Your PowerNode has an indicator that displays any of the following patterns and colors to show you its current
status:
Off (no color): All PowerNode ports are
powered off. Steady white in center: All PowerNode ports
are powered on.
Steady green in center: Some ports on a
multi-port PowerNode are powered on
(some are off). Two flashing green bars on each side of
white flashing center: PowerNode cannot
communicate with Gateway. This may occur
if the PowerNode is out of range from the
Gateway. You can move the PowerNode
closer to the Gateway to improve reception.
Or you can add additional PowerNodes
closer to the Gateway so that the
PowerNode can connect to the Gateway via
the additional PowerNodes (PowerNodes
can “piggy back” on each other’s network
connection).
Two green bars rotating clockwise:
PowerNode is in inclusion mode to connect
with Gateway. When inclusion is
successful, the rotating bars stop and all
bars turn green for several seconds
(flashing bars mean inclusion was
unsuccessful).
Two green bars rotating counter-clockwise:
PowerNode is in exclusion mode to
disconnect from Gateway. When exclusion
is successful, the rotating bars stop and all
bars turn green for several seconds
(flashing bars mean exclusion was
unsuccessful). All flashing green bars (forming a circle):
Inclusion or exclusion process was
unsuccessful.
All steady green bars (forming a circle):
Inclusion or exclusion process was
successful. The bars remain green for
several seconds.