M a n a g i n g P o w e r N o d e s
P o w e r N o d e s U s e r G u i d e
| 1 1
the white locked position. When you change the wheel color, the change is automatically
transmitted to your online account so that you see the correct room color when accessed through
a Web browser or smart device.
•
Change the wheel color and connected devices. The wheel color change is automatically
transmitted to your online account. However, if you are replacing devices on your PowerNode,
you must update the device information in your online account.
•
Move the PowerNode to a new location, but keep the same room color and devices. For example,
you may need to move the PowerNode to improve reception. When you move a PowerNode you
must have the Gateway re-establish its radio signals with the PowerNodes on your energy
management system.
Re-establish the Gateway’s Radio Signal
When you move a PowerNode or manually sync a PowerNode with a Gateway, you must have the
Gateway re-establish its radio signal with the PowerNodes on your energy management system.
You can perform this through your online account by using the following steps:
1.
Log in to your online account using a Web browser or smart device.
2.
Click the
My Settings
menu.
3.
When the
Settings
page opens, click the
Set Up Wizard
option in the menu on the left side of
the page.
4.
Click the
Rooms and PowerNodes
option under
Set Up Wizard
.
5.
Click the
Repair Network
button. A command is automatically sent to your Gateway to establish
the best radio connection with your PowerNodes.
