Greentec HL152- 242 Cutterbar
39
Mount the wear plater
►
Push the new wear plate
from the rear between the
profile bar and guard. The
arrow on the wear plate must
point in the direction of travel.
►
Position the two guards
correctly on the wear plate.
►
Insert the bolts.
►
Tighten the nuts to the
specified tightening torque.
Replacing the knife head
If the knife head is bent, damaged or deformed, it must be replaced immediately.
Removing the knife head
►
Align the knife stroke so that
the bolts on the head bearing
are on top.
►
Unscrew the bolts on the
knife head.
