BAR
R
IER
MOWER R
I 6
0
–
80
41
5.4.5
ADJUSTING AND SETTING THE MACHINE
(r)
This section describes the setting and adjustment options on the attachment tool.
On an RI edge barrier mower, there are a total of 2 options for setting and adjustment:
REMEMBER to always switch off both the vehicle and attachment tool before
adjusting the machine!
5.4.5.1
SETTING THE COLLISION PROTECTION (
”BREAK
-
BACK”
-SYSTEM)
Illustration of adjustment of spring-affected collision protection ("break-back" system): RI barrier mower 60 & 80
The RI barrier mower's collision protection ("break-back" system) is adjusted using the indicated bolt (M16) in
the picture above.
By tightening the inner bolt (M16), the spring will be compressed further, and the response of the collision
protection will seem stronger the more the bolt is tightened.
The RI barrier mower is set from the factory with the "break-back" system in the outermost position, which
gives the easiest response if any collision/impact with any fence posts, guard rails, etc.
It is recommended to use 2x ring spanners, to adjust the RI barrier mower
’
s collision protection ("break-back"
system)
