Ultra Tugger
®
10 Cable Puller and Pulling Packages
Greenlee Tools, Inc.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
6
SPECIFIC SAFETY RULES AND SYMBOLS
• Check the condition of the entire rope before use.
A worn or damaged rope can break under tension
and whip violently.
• Do not maintain a stationary rope on a rotating
capstan. The wear generated may cause the rope
to break under tension and whip violently.
Failure to observe these warnings could result in
severe injury or death.
Attach the pulling rope to the cable with appropri-
ate types of connectors as described in this manual.
Select connectors with a maximum rated capacity
of 44.5 kN (10,000 lb). An under-rated connector can
break under tension.
Failure to observe this warning could result in severe
injury or death.
Shear point:
Do not put fingers through holes in
elbow unit. Rotating parts may cut
off fingers.
Failure to observe this warning could
result in severe injury or death.
Keep hands away from the capstan.
Rope at the capstan can crush a
hand.
Failure to observe this warning could
result in severe injury or death.
Do not wrap rope around hands,
arms, waist or other body parts.
Do not stand in spent coils or tailed
rope. Hold rope so that it may be
released quickly.
Rope, cable, or a connecting device can break under
tension, causing the rope to whip violently.
• Do not allow any unnecessary personnel to remain
in the area during the pull.
• Do not allow any personnel to stand in line with the
pulling rope.
Failure to observe these warnings could result in
severe injury or death.
Do not allow the rope to become overlapped on
the capstan. If an overlap begins to develop, relax
the tailing force immediately and shut off the cable
puller.
Failure to observe this warning could result in severe
injury or death.
Use this tool for manufacturer’s intended purpose
only. Do not use the cable puller as a hoist or winch.
• The cable puller cannot lower a load.
• The load may fall.
Failure to observe this warning could result in severe
injury or death.
Always lock boom components
in place during assembly or dis-
assembly. Adding and removing
components may cause rotation.
Parts may strike nearby personnel.
Failure to observe this warning could
result in severe injury or death.
