– 16 –
T R A D I T I O N A L S E R I E S S T R A I G H T L E A N T O M O D E L • G R E E N H O u S E I N S T R u c T I O N S
A
B
C
1.
BACK GABLE END
(See Page 19)
Take the assembled back gable end
and stand it up on your foundation.
(Slide a bolt into the top of the corner
post, move it down approximately 3”
and temporarily tighten the bolt).
2.
SIDE WALL
(See Page 19)
Stand up side wall. Slide the gutter
(sidewall)
in between the end rafter
and the corner post.
(There should
be a 1/8” space – see Picture
A
).
By
sliding the gutter in as far as it goes,
the punched out slots line up with
the bolt track in the back of the
Glass Bar (
See Picture
B
).
Undo the
bolt in the corner and slide it up into
the slot and tighten up. Fasten the
bottom base (
See Picture
C
).
Make
sure the side base fits in between the
corner and end base.
3.
FRONT GABLE END
(See Page
19)
Follow the same procedure as the
back gable end.
Aluminum Frame Assembly
& Installation
