Greenhouse Style Traditional Straight Lean To, Instructions Manual

Page: 14 / 55

– 13 –
T R A D I T I O N A L ฀ S E R I E S ฀ S T R A I G H T ฀ L E A N ฀ T O ฀ M O D E L ฀ • ฀ G R E E N H O u S E ฀ I N S T R u c T I O N S
•฀ ฀Take฀the฀Glass฀Bars฀next฀to฀the฀
door frame - (see Sketch 4 on Page
9) and bolt them to the base/sill.
The angle cut should match the
roof slope
(See Picture
E
).
The 1” x 2” angle above the door
(49
3
/
4
” long) can now be bolted
on. The 1/4” round holes should
be lined up with the holes in the
plates
(See Picture
F
). Each end
of the 1” x 2” angle has a slot
punched out to accommodate
the bolt that is lined up with
the Glass Bars 24 1/2” from the
center.
Slide a bolt in the top of the Glass
Bar and fasten the angle to it
(See Picture
G
).
•฀ Bolt฀the฀1”฀x฀2”฀horizontal฀brace฀
at approximately 3’ from sill/
base. On larger greenhouses, a
diagonal 1” x 2” is sometimes
used.
E
F F
G
Front Gable End
Assembly
(contd.)