– 25 –
C R O S S C O U N T R Y F I V E - W A L L S E R I E S S T R A I G H T L E A N T O • G R E E N H O U S E I N S T R U C T I O N S
TAPING POLY BARS WITH FOAM
Tape all the aluminum polybars with 1/8” foam tape
both sides. Take a roll of tape and start at one end and
press on the bar.
Make sure that the aluminum is dry.
Slowly roll down the tape toward the outer edge and
press it down at the same time
(See Pictures). Be careful
because sometimes the edge of the paper is quite sharp.
Do not remove the paper until later.
NOTE:
Taping the
greenhouse can be
done before you put
the frame together.
If the weather is bad
or dark outside, bring
everything inside the
garage and put the
foam strips on the
bars.
Make sure that the
front / back / side /
roof bars don’t get
mixed up, it would
make it much harder
to put it together.
1/8” foam
DO NOT TAPE THE GUTTER
