SECTION D: MAINTENANCE AND REPAIR
STRETCHING AND REPLACEMENT OF BELTS:
For stretching belts act as following:
a) remove belts cover to have an access to the belts and a possibility to control
the tension
b) loosen
with a help of a suitable spanner
d) tighten up till the end the 4 bolts “A” previously loosened and restore
protecting case.
4 bolts “A”
(2 bolts on each side of the
machine)
c) screw the bolt “B” until the right tention of the belts is reached
a) remove belts cover to have an access to the belts
b) loosen with a help of a suitable spanner 4 bolts “A” (2 for each side of the
machine)
c) screw the bolt “B” until the right tention of the belts is reached
d) take out and replace the belts using original spare parts
d) stretch the belts following the instructions given in the previous paragraph.
For replacement of belts:
CAUTION
Before carrying out any type of maintanance operation turn off an engine
and take out the key from the board.
Page 18
BC 260 User’s Handbook
A
B
Machine framework
