S
ECTION B: INSTRUCTIONS FOR THE MACHINE USE
Pag 13
The machine is easily transfered to/from the working place by means of its truck
equipped with low-speed towing eye and 2 wedges used in order to have the
machine steady during the utilization. Once positioning is complete, clamp the
machine again by means of the proper pin fitted with handle.
COMMANDS AND STOPS
As the bioshredder BC-260 carries out its mincing function owing to the movement
transmitted by its explosion or diesel engine (depending on the equipment), an
operator must be quite familiar with the steps to be performed in order to start or
arrest the machine.
All the instructions regarding explosion or diesel engine can be found in the Section
C of this Manual related to utilization of explosion or diesel engines.
CAUTION
After machine stops, the inside moving elements keep on running on by
inertia for 30 seconds before getting quite still. For this reason, carrying out
any cleaning, maintenance, adjuscting and/or moving operation is
prohibited until the above mentioned time has elapsed.
Manuale BC 26
Blockade wedges
Page 13
BC 260 User’s Handbook
