Warning:
Before proceeding to this section an operator should carefully read the information
given in the SECTION A
that is integral part of the User's Handbook and
understanding of which is essential for SAFE machine use.
This machine consists essentiallyof asteel structural base holding the chipping
disk and the shaft fitted with shredding hammers. The following elements are
housed inthe machine base:explosion or diesel engine,the SHREDDER's front
hopper and the CHIPPER's side hopper.
The shredder hopper is equipped with a feeder unit, constituted by a toothed roller,
placed near the loading mouth and hydraulically operated, incorporates two
functions, i.e.: a) insure an even feeding of the material to be treated; b) avoid the
ejection of the treated material out of the loading hopper, thus allowing to work in
safety.
TECHNICAL DESCRIPTION OF THE MACHINE
When working over branches, roots, turfs and leaves it is highly recommended to
pay attention to avoid entering of stones or other extraneous subjects which could
speed up the wear of the shredding blades/hammers into the machine.
Therefore,
it is recommended not to carry out the loading operations on pebby grounds.
S
ECTION B: INSTRUCTIONS FOR THE MACHINE USE
Page 12
Shredder hopper
Hydraulic pump
Rotor group of blades
and hammers
Ejecting duct
Engine
Base
Wheel
Shredder hammer
Chipper blade
Shredder blade
Chipper hopper
BC 260 User’s Handbook
Control rod
Truck
Oil tank
hydraulic
