OPERATION
45
500ze YM180 (12
−
2011)
8. Use the wand to clean.
NOTE: Do not run the pressure sprayer pump for
sustained periods if not using the power wand.
The pressure sprayer pump could be damaged
from overheating if allowed to run for sustained
periods when the wand is not in use.
9. Release the trigger when finished cleaning
and set the wand down.
10. Press the top of the pressure washer switch
to turn off the pump. Turn off the machine.
11. Hold the wand with both hands and point the
wand towards the ground. Squeeze the trigger
to release pressure and drain water from the
system.
12. Wind the pressure washer hose back onto
hooks and return the pressure washer wand
to the storage hook. Close the access door.
REAR VIEW CAMERA (OPTION)
Use the Rear view camera to check areas behind
the machine when backing up the machine. Refer
to the rear view camera manual for operation
instructions.
RADIO AND COMPACT DISK PLAYER
(OPTION)
The radio and compact disk player is located
above the operator. Refer to the radio/compact
disk player manual for operation instructions.
AUTOMATIC LUBRICATION SYSTEM
(OPTION)
The Automatic lubrication system automatically
dispenses grease to all lubrication points. The
green indicator light located on the reservoir top
cover illuminates when the automatic lubrication
system is operating.
Press the TEST button daily to ensure the
automatic lubrication system is operating. The
motor will start and the paddle will rotate once in
approximately three minutes and then reset to the
default of one rotation every 12 minutes. The
pump cycle time of 12 minutes is not adjustable.
