OPERATION
20
500ze YM180 (12
−
2011)
WATER SWITCH (DUST SUPPRESSION)
Turn the Water switch to position 0 in areas where
dust suppression is not necessary. Neither the
brush head spray jets nor the vacuum tube spray
jets operate in this mode. The CloudMaker nozzle
continues to rotate to keep the spray head clean,
but does not use water.
Turn the Water switch to position 1 for dry areas
where full dust suppression is necessary. The
CloudMaker nozzle, brush head spray jets, and
vacuum tube spray jet operate in this mode.
Turn the Water switch to position 2 in areas where
some dust suppression (wet sweeping) is
necessary. Only the brush head spray jets and
vacuum tube spray jets operate in this mode. The
CloudMaker nozzle continues to rotate to keep the
spray head clean, but does not use water.
WATER FLOW CONTROL KNOB
The Water flow control knob controls the amount
of water going to the brush head spray jets. Turn
the Water flow control knob clockwise to decrease
the amount of water supplied to the brush head
spray jets and counterclockwise to increase the
amount of water to the brush head spray jets.
NOTE: To operate only the CloudMaker and
conserve water, turn the Water Switch to position
1 and the water flow control knob to the minimum
flow setting to turn off the water to the brush head
spray jets.
