16
USER MANUAL - URBAN RYDER™
www.greenlightcycle.com
1-855-GRN-RYDE
(1-855-476-7933)
URBAN RYDER™ OPERATION: SYSTEM
11. Pedal Assist Level & Thro le Power O
ff
/On Selec on
When the King Meter® is illuminated, pressing the UP or DOWN Arrows will
change the output power of the motor for the pedal assist, or turn o
ff
the
power to the motor completely (set assist to “ASSIST 0”). The pedal assist power
ranges form Level 1 to 5. Level 1 is the minimum power the motor will supply by
turning the pedals and Level 5 is the maximum power (100%). The default level
when the King Meter® is started is Level 1.
When the “ASSIST” is set to “0”, no power will be supplied from the motor by
pedalling or by using the thumb thro le. Use this mode when you want to ride
the bike without any motor assist.
The thumb thro le (
Fig. 11.1
) allows you to immediately increase the power to
the motor with the touch of your thumb, similar to the thro le on a motorcycle.
Increasing pressure on the thumb thro le will increase the power and speed.
The “ASSIST” se ngs (Level 1 to 5), will not adjust the power to the thumb
thro le.
When the “ASSIST” selec on is set at “0”, the thumb thro le is “OFF”. When the
assist selec on is set at Level 1 to 5, the thumb thro le is “ON”.
King Meter® Display Backlight & Bike Headlight
To turn the backlight and bike headlight “ON” and “OFF”, hold the UP Arrow
and MODE bu on together for 3 seconds (
Fig. 11.2
).
Use this feature at night
or in low light condi ons to illuminate the display and your headlight for safe
riding.
Distance & Time Display
When the King Meter® is illuminated, it will display the odometer se ng “ODO”
which is the total distance the bike has been ridden. Press the MODE bu on to
change the display to show the riding distance for this trip.
Ba ery Capacity
When the ba ery charge is full, the ba ery symbol will show 5 segments
illuminated in black. As the ba ery is consumed, the segments will disappear to
indicate the amount of power available, un l all the segments have disappeared
and the ba ery symbol is white, indica ng the level is severely low.
When the ba ery symbol is completely white, it will begin to
fl
ash.
A
fl
ashing
ba ery symbol means that you need to recharge immediately.
We advise that
you do not use the electric power to assist your bicycle in this state. Set the
“ASSIST” to “0” and use only your own pedal power un l you can recharge the
ba ery (
Fig. 11.3
). This will help give your ba ery a longer life.
Fig. 11.2 Backlight & Bike
Headlight, Hold
Down “MODE & UP
Arrow Button for 3
Seconds
Fig. 11.1 Thumb Throttle
Fig. 11.3 King Meter®
Display, Set ASSIST
to “0” While
Programming
Urban Ryder™ Operation: System & Battery Power “ON/OFF”
