11
1-855-GRN-RYDE
(1-855-476-7933)
www.greenlightcycle.com
USER MANUAL - URBAN RYDER™
URBAN RYDER™ OPERATION: BATTERY
• Turn the key to “OFF” and remove the key from the ba ery (
Fig. 7.1
).
• Locate the charging port on the ba ery on the top right side and turn the
dust cover to the side to expose the charging port (
Fig. 7.2
).
• Insert the ba ery charger plug into a 120 Volt wall socket receptacle with
a grounded circuit. Do not use an extension cord. The light on the charger
should illuminate to steady green.
• Insert the round plug of the charger into the ba ery charging port, the LED
should illuminate to steady red (
Fig. 7.5
).
• When the light on the charger changes to a steady green, the ba ery is
charged (
Fig. 7.4
). Unplug the charger from the wall receptacle and then
from the bike ba ery.
Always disconnect the plugs in this order.
A full charge will take approximately
4 to 6 hours to complete
. Avoid
overcharging and damaging the ba ery. When the light changes to steady
green, the charger is in “trickle mode”. Avoid prolonged charging in this mode
as it may damage the ba ery.
Maximum con nuous charging me is 24
hours.
The charger will become warm during charging so keep the charger away
from any
fl
ammable materials. The charger may reach temperatures up to
185°F/85°C during normal charging. Never enclose the charger or put anything
Fig. 7.4 Battery Charged -
Green LED
Fig. 7.5 Battery Charging -
Red LED
on top of it when charging.
The charger must be well ven lated.
If the charger emits a peculiar smell or the temperature is too high, stop charging immediately! Do not drop or damage
the charger. Avoid any contact with water when charging your ba ery. If a plug or socket gets wet, dry it completely before
using. Always use the charger according to the instruc ons. Improper use or a emp ng to open/repair the charger will void
your warranty.
Urban Ryder™ Operation: Battery Removal & Installation, Precautions, Charging, and Storage
Fig. 7.6 USB Port
Charge Your Smartphone
Want to charge your device on the go? Our new 13amp ba eries come with a
USB charging port (max. 1 amp) so you can charge your smartphone while you’re
naviga ng your ride! Just remember to keep your eyes on the road and not on
your device!
USB charging cable not included.
Remove the protec ve cover from the USB port (max 1 amp). Determine the
correct orienta on of your USB charger cable and insert it into the USB port on
the Urban Cruzer ba ery. Plug your charging cable into your smartphone device
and turn the E-bike ba ery key to the “ON” posi on. Check the ba ery indicator
on your smartphone to determine that it is now charging. Be sure to check your
smartphone’s rated amperage prior to charging it with your E-bike ba ery. Do not
a empt to charge any device other than a smartphone rated for 1 amp.
