1
124574
(07/11)
Owner’s Manual Supplement
t
HeadSHOk FaTTY dLR80
LOCKOUT
LEG
DROPOUT
BRAKE
POST
MOUNT
CROWN
REBOUND
BOOT
HD191/BLK
49 mm
33 mm
HD170/
KT031/
KF211/
KF264/
KH005/
KH047/
KH022/
KF266/
QSMSEAL/
HD169/
HDTL149/
Fork Installation Tool
INTEGRATED
HEADTUBE
DLR80 DAMPING CARTRIDGE
HD169/
OUTER TUBE
AIR VALVE
Specifications
INTeNded USe
-
Condition 3, Cross-Country , Marathon, Hardtails
See Intended Use in your
Cannondale Bicycle Owner’s Manual
.
HEADTUBE COMPATIBILITY
Headshok Integrated
TRAVEL
80 mm
ADJUSTMENT
Rebound, Lockout, On/Off
SPRING TYPE
Air
RECOMMENDED SAG 10%
8 mm
DAMPING CARTRIDGE
Cannondale DLR80
DAMPER OIL WT.
5W
BRAKE MOUNT
Post Mount (160 mm)
WHEEL
Quick Release
WaRNING
This supplement may include procedures beyond the scope of general mechanical
aptitude. Special tools, skills, and knowledge may be required. Improper
mechanical work increases the risk of an accident. Any bicycle accident has risk
of serious injury, paralysis or death. To minimize risk we strongly recommend
that owners always have mechanical work done by an authorized Cannondale
retailer.
Pre-Ride Checklist
Before every ride do the following:
1. Check the fork boot for damage cracking, splits, or tears. Be sure to
check in the folds of the boot. Check for any cables or lines rubbing
the boot.
2. Check the attachment of the boot at the top and bottom. The upper
and lower boot lips should be fitted over the lower collar and fork lip.
NO PART OF THE FORK INNER TUBE SHOULD BE EXPOSED.
3. Replace the boot band clamp as required. Always tighten securely.
Replacement clamps are available through a Cannondale Dealer.
If you find boot damage, the area under the fork should be inspected
for damage. And the damaged boot must be replaced with a new one.
Do not try to fix it.
4. Make sure the fork and its adjustment features are operating normally.
Replacement part numbers shown
BOLD ITALIC
text.
Available through Cannondale Dealers.
