8. Assembly the protective guard.
Hang the hooks of the protective guard onto
the holes in supports. Secure the protective
guards with fixing brackets with 4pcs
3/16” screws.
9. Attach the three side panels to the heater
using 18pcs screw 3/16”.
Note : Do not cover the front side where
the control knob is.
10.Install the knob to M4x10 screw. Hang the
chain to the hole on the control box assy
and put the pothook of front panel to the
holes of bottom plate.
3/16” Screw
Philips
screwdriver
Fixing
Bracket
3/16” Screw
Philips
screwdriver
Drejeknap
M4 X 10 skrue
Kæde
Philips-
skruetrækker
Hardware Used
Hardware Used
Hardware Used
